G 1/2” Stainless steel 316 Pre-Set Safety Valve 25 bar (362.6 psi) DN 8

Description

The G 1/2 inch stainless steel 316 pre-set safety valve that is used to control the pressure in a system by venting once the set pressure has been achieved. The valve opens using a spring-based mechanism to protect your system from being subjected to pressures that exceed the maximum safety levels. The set pressure is pre-set at 25 bar (362.6 psi). This model has G 1/2 inch ports and the housing material is stainless steel 316 with a FPM/FKM sealing. This valve blows the gas off freely into the atmosphere, because of this it is only suitable for compressed air and other non-toxic and non-flammable gases. The maximum blow-off capacity is 619 m³/h. The temperature range of this safety valve is between -25 °C to 180 °C (-13 °F to 356 °F).

Pros:

• Suitable for all non-toxic and non-flammable gases
• Reliable FPM/FKM sealing
• Small form factor
• High blow-off capacity of 619 m³/h

Cons:

• Not suitable for liquids
• Blows freely into the atmosphere

SFL-P series

The SFL-P series are brass and stainless steel pressure relief valves designed to protect your system from over-pressurizing. The valves are available in pre-set pressures of 0.2 – 50 bar (2.9 – 725 psi) and come with various corresponding blow-off capacities. Both DN8 and DN10 are available. The valves have a FPM/FKM sealing for a tight and secure fit. They are suitable for compressed air and other non-toxic, non-inflammable gases. The gases are blown off freely into the atmosphere.

A calibration certificate is not available.